How to wrap your Tree Ring Handles

How to wrap your Tree Ring Handles

Introduction

  1. What you'll need
    • 2 Tree Ring Handles
    • 160” Cork Wrap
    • A knife or scissors

 Great Video on the technique here ⬇️

Wrap Tutorial

  1. Measure out 80” of Cork Wrap. Then lay across handle leaving 3” off the end. Take other end and fold backwards so both ends are going off to the right, creating a loop on the left side.

  

 

  1. Begin Wrapping the cork around the handle, about 16 times.

 

 

  1. After wrapping, take the left end and thread it through the loop from step 1

 

 

  1. Grab both ends and pull right end tight, pulling the loop under the wrap. Make sure the left end is pulled tight and under tension prior, otherwise the wrap will slip and slide.

 

  1. Finally cut off both ends. The wrap is now complete and should be just under 3” long.

Enjoy your wrapped Tree Ring Handles!

 

Back to blog